EN
In the precise world of chemical research, the electronic balance chemistry is an indispensable measurement tool. Its accuracy, stability, and durability are directly related to the reliability of experimental results. This article will discuss the selection, proper use, and maintenance of electronic balance chemistry to help researchers better manage this important instrument.
In the vast field of chemical experiments, selecting the right electronic balance chemistry is the first step to ensure accurate data. Firstly, accuracy is a primary consideration. Different experiments require different levels of accuracy from the balance, so it is crucial to specify the required precision, such as 0.1 mg or 0.01 mg, rather than relying on vague concepts like one in ten thousand or one in a hundred thousand, to avoid purchasing an unsuitable device. Additionally, be aware that some foreign manufacturers use relative accuracy standards, so carefully check the technical parameters.
The weighing range is also an important factor. Choose a maximum capacity that is reasonable, generally recommending a range limit of 120% of the maximum weighing value. This approach meets experimental needs while avoiding resource wastage.
Proper use of the electronic balance chemistry is crucial for ensuring measurement accuracy. During installation, ensure that the balance is placed in a standard balance room, away from direct sunlight, vibration sources, heat sources, and strong electromagnetic fields. Maintain a constant room temperature (around 20°C) and suitable relative humidity (50% RH to 70% RH).
Leveling is a necessary step before use. Adjust the leveling feet to center the leveling bubble within the ring, ensuring stable weighing. Then, follow the manual instructions for preheating. Balances with high precision require longer preheating to eliminate internal stress and improve measurement accuracy.
During weighing, follow the procedure of “tare - add sample - read - clean” to ensure each step is performed accurately. Particularly when handling hygroscopic, volatile, and corrosive chemicals, use weighing bottles for quick measurement to avoid damage to the balance.
To ensure long-term stable operation of the electronic balance chemistry, meticulous maintenance is crucial. Firstly, designate a responsible person for the balance's management and maintenance, recording usage and maintenance history to detect and address issues promptly.
During use, do not exceed the maximum rated capacity of the balance to prevent overload damage. In case of accidental spillage of chemicals, clean it immediately to prevent residues from corroding the balance. Keep the balance and draft shield clean, regularly using lint-free cotton swabs dipped in anhydrous ethanol to wipe away stains and residues.
For frequently used balances, it is advisable to keep them powered on when not in use to avoid frequent preheating. However, if not used for a long time, periodically power on and preheat the balance to maintain its performance. Additionally, regularly perform self-calibration or send the balance for inspection to ensure measurement accuracy. If any abnormalities are detected, stop using the balance immediately and send it for repair.
In summary, the selection, use, and maintenance of electronic balance chemistry are critical for ensuring accurate and reliable chemical experimental data. Through careful selection, standardized operation, and meticulous maintenance, we can maximize the effectiveness of this precision instrument in research.
