EN
The electronic crane scale is mainly composed of sensors, scale frames, and weighing display controllers. The electronic scale frame is a load receiving and transmitting device that transmits the weight of the items on the transmission belt to the load cell, and is also the first in the process of item weighing. A conversion link, because it is the most important part of the electronic belt scale. The accuracy and stability of a certain link play a decisive role in the performance of the electronic belt scale. During use, care should also be taken to avoid overloading the sensor of the crane scale.
The working principle of the crane weighing machine is composed of electronic components - weighing sensor, amplifier circuit, AD conversion circuit, single-chip microcomputer circuit, display circuit, keyboard circuit, communication interface circuit, regulated power supply circuit and other circuits.
1. The working principle of the wireless crane scale
The weight of the object acts on the sensor through the hook, which is converted into a corresponding analog voltage signal by the sensor and sent to the data acquisition board, and then converted into a corresponding digital signal by amplification, filtering, and A/D, and then sent to the instrument for data processing through the wireless transmission system. After the board is processed, the corresponding weight data is obtained, and the number is displayed on the display screen of the instrument. The weight data can be output through the serial port, and when necessary, it can be printed by a printer, sent to a large-screen display or sent to a host computer.
2. Working principle of direct-view crane scale
The weight of the object acts on the sensor through the hook, which is converted into a corresponding analog voltage signal by the sensor and sent to the data acquisition board, and then converted into a corresponding digital signal by amplification, filtering, and A/D, and then processed by the data processing board of the instrument to obtain the corresponding signal. The weight data is displayed by the display screen, which is directly embedded on the scale body of the crane scale. The operator directly checks relevant information such as weight data from the display window of the electronic crane scale body.
Before using the electronic crane scale, the corresponding battery should be put into the scale body and the hand-held device. When installing or replacing the battery, it is necessary to tighten the battery clamp locking screw, check whether the battery clamp is firmly fixed on the scale body, and then close the crane scale door. Close and lock to prevent accidents.
Avoid severe vibration and collision of the electronic crane scale. There are many electronic components inside the electronic crane scale, such as integrated circuits, quartz crystals, sensors, displays, etc. When this kind of weighing electronic scale is subjected to severe collisions, these components may be damaged, causing electronic scale failure, affecting accuracy and even affecting normal use. To prevent the scale body from colliding with other items or falling from a high altitude, the instrument should be handled with care and not placed randomly to prevent unnecessary losses. When the instrument is fixed on a crane for use, vibration reduction measures should be taken to avoid affecting reliability.
Do not disassemble the parts on the electronic crane scale at will. Do not open the sealing port on the sensor, disassemble the integrated circuit and other components on the instrument. Necessary maintenance must be carried out under the guidance of relevant technical personnel or with certain maintenance knowledge to prevent the failure from expanding.
The shell of the electronic crane scale designed by the digital scale manufacturer is made of ABS engineering plastics. When cleaning, please use a soft cloth with water or detergent to wipe it. It is strictly forbidden to use benzene, nitro solvents, caustic soda liquid and other corrosive substances for cleaning.
